Home of Genuine Products | Installments available for Govt Employees
Genuine products | Easy installments for Govt Employees

AC Heat Mode in Winter: Best Temperature, Units per Hour and Cost

AC Heat Mode in Winter: Best Temperature, Units per Hour and Cost - SK Electronics buying guide

Quick answer: To use AC heat mode in winter, press MODE until HEAT (usually a sun symbol) shows, set about 20 to 22°C and close doors and windows. Only heat and cool models have heat mode. A 1.5 ton heat and cool inverter AC uses roughly 0.35 to 1.9 units an hour on heat, depending on how hard it works. At its rated point the Gree GS-18PITH11W gives 5,300 W of heat for 1,450 W of electricity, about 3.7 units of heat for every unit you pay for. An electric rod, oil or fan heater gives one.

What is heat mode on an AC?

A heat and cool split AC is a heat pump. In summer it moves heat from your room to the outdoor unit. In heat mode it runs the same cycle in reverse and moves heat from the outdoor air into the room. ENERGY STAR explains that because heat pumps move heat instead of making it from fuel, they can deliver up to three times more heat energy than the electrical energy they use.

On most remotes, heat mode sits in the MODE cycle with Auto, Cool, Dry and Fan, and is usually shown as a sun symbol. If your remote has no HEAT option, or the AC only blows room-temperature air on it, your model is probably cooling only. Check the “Function” line on the spec sheet: it should say Heat and Cool.

Which ACs have heat mode?

These 1.5 ton models in our range list heat and cool:

Model Heating listed Price (13 Nov 2026)
Gree GS-18PITH11W Pular 5,300 W rated (1,200 to 5,700 W) Rs 168,000
Kenwood E-Serene KES-1873S 18,000 BTU heating capacity Rs 154,999
Orient Smartron Pro 18G Heat and cool (dual function) Rs 135,000
PEL Turbo DC Ultimate T3 PINV-18K Heat and cool Call for price

Prices change with the market. Call 0333-9080484 or WhatsApp 0348-7647331 to confirm today’s price and stock.

Gree GS-18PITH11W Pular 1.5 ton heat and cool DC inverter split AC
Gree GS-18PITH11W: 5,300 W of heat for 1,450 W of electricity at its rated point.

What is the best temperature for AC heat mode?

Start at 20°C and go up a degree at a time only if you feel cold. Every degree you add makes the compressor work harder for longer, so a lower setting means fewer units.

  • The health floor: the World Health Organization’s housing and health guidelines treat 18°C as a safe and well-balanced indoor temperature for healthy people in cold seasons. Rooms used by elderly people, small children or anyone with heart or lung illness may need to be warmer.
  • Do not set 30°C to warm up faster. An inverter AC already runs at high power while the room is cold, and then slows down as it nears the setting. A very high setting only keeps it at high power for longer.
  • At night, use Sleep. On Gree’s Sleep 1 setting in heat mode, the set temperature drops by 1°C after one hour and by 2°C after two hours, which suits sleeping under a blanket and saves units.

Gree’s manual lists a heat mode setting range of 8 to 30°C, so the remote is not the limit. Your comfort and your bill are.

How many units does an AC use on heat mode?

One unit on your bill is 1,000 watts used for one hour, so the units an AC uses per hour equal its power input in kilowatts. The Gree GS-18PITH11W spec sheet gives the full heating range:

Gree GS-18PITH11W (heating) Heat output Power input Units per hour Heat per unit
Minimum 1,200 W 350 W 0.35 3.4
Rated 5,300 W 1,450 W 1.45 3.7
Maximum 5,700 W 1,900 W 1.9 3.0

Worked example for one winter night: 8 hours at the rated point would use 1.45 x 8 = 11.6 units. Once the room is warm, an inverter AC slows down, and at its minimum the same 8 hours use 0.35 x 8 = 2.8 units. A real night falls between about 3 and 12 units for this model, depending on how cold it is outside, how well the room holds heat and the temperature you set. Multiply by the per-unit rate on your own bill; residential tariffs are charged in slabs, so extra units can also move the whole bill into a higher slab.

Bar chart: the Gree GS-18PITH11W heat and cool AC gives 3.4 units of heat per unit of electricity at minimum output, 3.7 at rated output and 3.0 at maximum, against 1.0 for an electric heater
Heat delivered per unit of electricity, from the Gree heating spec sheet.

AC heat mode vs electric heater vs gas heater

Heat and cool inverter AC Electric rod, oil or fan heater Gas heater
Heat per unit of electricity About 3 to 3.7 (Gree spec) 1 (every watt becomes one watt of heat) Uses gas, not electricity
Example running cost 0.35 to 1.9 units an hour A 2,000 W heater uses 2 units an hour Depends on your gas bill
Works at night in winter? Yes, whenever there is electricity Yes Only when gas is supplied (see below)
Flame and carbon monoxide No combustion, so no carbon monoxide No combustion Burns gas: needs ventilation
Also cools in summer Yes No No

Gas timings this winter: from 4 November 2026, SNGPL limited domestic gas in Islamabad, Punjab and Khyber Pakhtunkhwa to three cooking-time slots: 6:30 to 9:00 am, 12:00 to 2:30 pm and 6:00 to 9:00 pm. A gas heater cannot warm a bedroom through the night on that schedule, while a heat and cool AC can.

Safety: the US CDC warns that carbon monoxide from burning fuel can cause sudden illness and death, and you cannot see or smell it. Never sleep in a closed room with a gas heater burning. ENERGY STAR notes that heat pumps burn no fuel, so they give off no carbon monoxide indoors. Our gas safety guide covers ventilation and what to do if you smell gas.

Why does my AC blow no air or cold air at first on heat mode?

This is normal. To stop cold air blowing into the room, the indoor unit waits until its coil is warm before the fan starts. Gree’s manual says the indoor unit delays 1 to 5 minutes before blowing air after heating starts, depending on the room temperature. The outdoor unit may also pause now and then on very cold days to clear frost from its coil; Gree lists an “intelligent defrost” feature on the GS-18PITH11W for this.

If the AC keeps blowing cold air after 10 minutes, check that the remote is really on HEAT and not Cool or Fan, that the filters are clean, and that nothing blocks the outdoor unit. If it still does not heat, call for service: the fault may be in the reversing valve, a sensor or the gas charge, which needs a technician.

Tips to heat a room with fewer units

  1. Close doors and windows, and draw heavy curtains at night.
  2. Point the air flow down. Warm air rises, so heat that starts at floor level spreads better. The Gree Pular lists “ceiling cooling and floor heating” air flow for this.
  3. Set 20°C, and use Sleep at night.
  4. Clean the filters regularly. A dirty filter cuts air flow in winter as much as in summer.
  5. Keep the outdoor unit clear of leaves, covers and stored items so it can draw in air.
  6. Heat only the rooms you use, and close the doors between them.

Frequently asked questions

How many units does a 1.5 ton inverter AC use on heat mode?

About 0.35 to 1.9 units an hour for the Gree GS-18PITH11W, and 1.45 at its rated heating point. Over an 8 hour night that is roughly 3 to 12 units, depending on the cold and the setting.

What is the best temperature for AC heat mode?

Start at 20°C. The WHO treats 18°C as a safe indoor minimum for healthy people in cold seasons; rooms for elderly people and small children may need to be warmer. A lower setting uses fewer units.

Is AC heating cheaper than an electric heater?

Yes. An electric heater turns one unit of electricity into one unit of heat, while a heat and cool inverter AC gives about 3 to 3.7 units of heat per unit, according to the Gree spec sheet.

Is AC heating cheaper than a gas heater?

It depends on your gas and electricity rates, so compare your own bills. The AC works through the night when gas is off under this winter’s SNGPL schedule, burns no gas and gives off no carbon monoxide.

Why is my AC not blowing hot air on heat mode?

For the first 1 to 5 minutes the indoor fan waits for the coil to warm up, which is normal. If it still blows cold after 10 minutes, check the mode, filters and outdoor unit, then call for service.

Does every inverter AC have heat mode?

No. Only heat and cool models do. Check that the spec sheet says Heat and Cool before you buy.

Next steps

Compare heat and cool models in our split AC range and read the split AC buying guide. For summer running costs see how many units a 1.5 ton inverter AC uses per hour, and for every button on the remote see AC modes explained. Hot water is the other big winter bill: read electric geyser vs gas geyser.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *

Cookies on SK Electronics

We use essential cookies to run the shop, such as your cart and login. With your permission we also use Google Analytics to see how the site is used, so we can improve it. You can change your choice at any time under Cookie settings at the bottom of the page. Privacy Policy